...
Once all Port Injection tables are populated you can enable our custom code by setting Enable Nexsys Motorsport PI Conversion to 1.
| Warning |
|---|
Differential Fuel Pressure Compensation table should be filled with 100% if using a 1:1 boost referenced fuel pressure regulator. |
| Warning |
|---|
MHD’s PI Safety MUST be disabled in flash-time options before flashing the vehicle. Failure to do so will result in pops/bangs on throttle lift that can cause engine, turbo and exhaust damage. |
Other table recommendations
...
Fuel Target Adder (Cat Heating) - You can use our base values below. This table is identical to the one above but is used when cat heating is active. Modifying this table is important as in stock form this table will cause the AFR target to be too lean for port injection.
...
After Start Enrichment (ECT) - You can use our base values below. This table allows the tuner to adjust relative fuel mass after the engine has started for a certain duration of engine cycles.
...