Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Start the installation by installing the direct injector plugs by following the below guide.

Direct Injector Plug Installation

Install the high pressure fuel pump block off plate.

Install our port injector harness.

Fuel Injector Harness Installation

If you have purchased one of our ignition coil harnesses, install it at this time.

Ignition Coil Harness Installation

Install the Y-Splitter adapter to provide power to the ignition coil and fuel injector harness.

Installing Y-Splitter

  • No labels