...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Basic Disassembly
|
Read over the fuel system requirements below before proceeding.
...
Now you are ready to depin and remove the factory fuel injector harness. Follow the depinning steps outlined below and pull the factory harness out of the DME box towards the engine.
...
.
...
If you are replacing the factory ignition coil harness with one of ours, follow the depinning steps outlined below and pull the factory harness out of the DME box towards the engine.
...
.
| Tip |
|---|
The generalized disassembly process is now complete. Proceed with installation by clicking below. |